Datasheet4U Logo Datasheet4U.com

TPS74401 - 3.0-A Ultra-LDO

Description

The TPS74401 low-dropout (LDO) linear regulators provide an easy-to-use robust power-management solution for a wide variety of applications.

The userprogrammable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up.

Features

  • 1 Input Voltage Range: 1.1 V to 5.5 V.
  • Soft-Start (SS) Pin Provides a Linear Startup With Ramp Time Set by External Capacitor.
  • 1% Accuracy Over Line, Load, and Temperature.
  • Supports Input Voltages as Low as 0.9 V With External Bias Supply.
  • Adjustable Output: 0.8 V to 3.6 V.
  • Ultra-Low Dropout: 115 mV at 3.0 A (typical).
  • Stable With Any or No Output Capacitor.
  • Excellent Transient Response.
  • Open-Drain Power-Good (VQFN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TPS703 Photodiode Toshiba
TPS703F Photodiode Toshiba
TPS704 Photodiode Toshiba
TPS704F Photodiode Toshiba
TPS705 SILICON PIN PHOTO DIODE Toshiba Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
TPS74401-EP 3.0-A Ultra-LDO
TPS74001 1.5A Low-Voltage LDO Regulator
TPS74012 1.5A Low-Voltage LDO Regulator
TPS7415 200-mA LOW-DROPOUT VOLTAGE REGULATORS
TPS7418 200-mA LOW-DROPOUT VOLTAGE REGULATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community Reference Design TPS74401 SBVS066R – DECEMBER 2005 – REVISED APRIL 2017 TPS74401 3.0-A, Ultra-LDO with Programmable Soft-Start 1 Features •1 Input Voltage Range: 1.1 V to 5.5 V • Soft-Start (SS) Pin Provides a Linear Startup With Ramp Time Set by External Capacitor • 1% Accuracy Over Line, Load, and Temperature • Supports Input Voltages as Low as 0.9 V With External Bias Supply • Adjustable Output: 0.8 V to 3.6 V • Ultra-Low Dropout: 115 mV at 3.0 A (typical) • Stable With Any or No Output Capacitor • Excellent Transient Response • Open-Drain Power-Good (VQFN Only) • Packages: 5-mm × 5-mm × 1-mm VQFN (RGW), 3.5-mm × 3.
Published: |