www.ti.com......................................................................................................................................................... SLVS209H – JULY 1999 – REVISED AUGUST 2008
DUAL-OUTPUT LOW-DROPOUT VOLTAGE REGULATORS
•23 Dual Output Voltages for Split-Supply
• Output Current Range of 0mA to 1.0A per
• 3.3V/2.5V, 3.3V/1.8V, and 3.3V/Adjustable
• Fast-Transient Response
• 2% Tolerance Over Load and Temperature
• Dropout Voltage Typically 350mV at 1A
• Ultra-low 85µA Typical Quiescent Current
• 1µA Quiescent Current During Shutdown
• Dual Open-Drain Power-On Reset with 200ms
Delay for Each Regulator
• 28-Pin PowerPAD™ TSSOP Package
• Thermal Shutdown Protection for Each
The TPS767D3xx family of dual voltage regulators
offers fast transient response, low dropout voltages
and dual outputs in a compact package and
incorporating stability with 10µF low ESR output
The TPS767D3xx family of dual voltage regulators is
designed primarily for DSP applications. These
devices can be used in any mixed-output voltage
application, with each regulator supporting up to 1A.
Dual active-low reset signals allow resetting of
core-logic and I/O separately.
Because the PMOS device behaves as a low-value
resistor, the dropout voltage is very low (350mV
typically at an output current of 1A for the
TPS767D325) and is directly proportional to the
output current. Additionally, since the PMOS pass
element is a voltage-driven device, the quiescent
current is very low and independent of output loading
(typically 85µA over the full range of output current,
0mA to 1A). These two key specifications yield a
significant improvement in operating life for
battery-powered systems. This LDO family also
features a sleep mode; applying a TTL high signal to
EN (enable) shuts down the regulator, reducing the
quiescent current to 1µA at TJ = +25°C.
The RESET output of the TPS767D3xx initiates a
reset in microcomputer and microprocessor systems
in the event of an undervoltage condition. An internal
comparator in the TPS767D3xx monitors the output
voltage of the regulator to detect an undervoltage
condition on the regulated output voltage.
The TPS767D3xx is offered in 1.8V, 2.5V, and 3.3V
fixed-voltage versions and in an adjustable version
(programmable over the range of 1.5V to 5.5V).
Output voltage tolerance is specified as a maximum
of 2% over line, load, and temperature ranges. The
TPS767D3xx family is available in a 28-pin PWP
TSSOP package. They operate over a junction
temperature range of –40°C to +125°C.
LINE TRANSIENT RESPONSE
VOUT = 3.3V
CL = 10mF
5.3 TA = 25°C
0 20 40 60 80 100 120 140 160 180 200
t - Time - ms
vs FREE-AIR TEMPERATURE
102 IOUT = 1A
IOUT = 10mA
VOUT = 3.3V
COUT = 10mF
IOUT = 0
-60 -40 -20 0 20 40 60 80 100 120 140
TA - Free-Air Temperature - °C
NC = No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2008, Texas Instruments Incorporated