TPS79328 Datasheet | Texas Instruments

Product Folder Sample & Buy Technical Documents Tools & Software Support & munity TPS793 SLVS348L - JULY 2001 - REVISED MAY 2015 TPS793 Low-Noise, High PSRR, RF, 200-mA Low-Dropout Linear Regulators in NanoStar™ Wafer Chip Scale and SOT-23 1 Features - 1 200-mA RF Low-Dropout Regulator With Enable - Available in Fixed-Voltage Versions from 1.8 V to 4.75 V and Adjustable (1.22 V to 5.5 V) - High PSRR (70 dB at 10 kHz) - Low Noise (32 μVRMS, TPS79328) - Fast Start-Up Time (50 μs) - Stable With a 2.2-μF Ceramic Capacitor - Excellent Load and Line Transient Response - Very Low Dropout Voltage (112 mV at 200 mA, TPS79330) - 5- and 6-Pin SOT23 (DBV) and NanoStar Wafer Chip Scale (YZQ) Packages 2 Applications - RF: VCOs, Receivers, ADCs - Audio - Cellular and Cordless Telephones - Bluetooth®, Wireless LAN - Handheld Organizers, PDAs 3 Description The TPS793 family of low-dropout (LDO) low-power linear voltage regulators Features high power-supply rejection ratio (PSRR), ultralow-noise, fast start-up, and excellent line and load transient responses in NanoStar™ wafer chip scale and SOT23 packages. NanoStar packaging gives an ultrasmall footprint as well as an ultralow profile and package weight, making these devices ideal for portable applications such as handsets and PDAs. Each device in the family is stable, with a small, 2.2-μF ceramic capacitor on the output. The TPS793 family uses an advanced, proprietary BiCMOS fabrication process to yield extremely low dropout voltages (for example, 112 mV at 200 mA, TPS79330). Each device achieves fast start-up times (approximately 50 μs with a 0.001-μF bypass capacitor) while consuming very low quiescent current (170 μA typical). Moreover, when the device is placed in standby mode, the supply current is reduced to less than...