TS3USB221
Features
- VCC operation from 2.3V and 3.6V
- VI/O accepts signals up to 5.5V
- 1.8V patible control-pin inputs
- Low-power mode when OE is disabled (1μA)
- RON = 6ω maximum
- δr ON = 0.2ω typical
- CIO(ON) = 6pf maximum
- Low power consumption (30μA maximum)
- ESD > 2000V Human-Body Model (HBM)
- High bandwidth (1GHz typical)
2 Applications
- Routes signals for USB 1.0, 1.1, and 2.0
- Mobile industry processor interface (MIPI™) signal routing
- MHL 1.0
D+
1D+
D-
1D-
2D+ 2D-
Digital Control
Block Diagram
3 Description
The TS3USB221 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1.1GHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The...
