TS3USB30
Features
- 1 VCC Operation at 3 V and 4.3 V
- 1.8-V patible Control-Pin Inputs
- IOFF Supports Partial Power-Down-Mode
Operation
- Ron = 10 Ω Maximum
- ΔRon <0.35 Ω Typical
- Cio(ON) = 7 p F Typical
- Low Power Consumption (1 μA Maximum)
- ESD Performance Tested Per JESD 22
- 6000-V Human Body Model (HBM) (A114-B, Class II)
- 1000-V Charged-Device Model (C101)
- 250-V Machine Model (A115-A)
- - 3-d B Bandwidth = 955 MHz Typical
- Packaged in 10-pin UQFN (1.4 mm × 1.8 mm)
2 Applications
- Routes Signals for USB 1.0, 1.1, and 2.0
- Mobile Industry Processor Interface (MIPI) Signal
Routing
3 Description
The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (955 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential...
