Datasheet4U Logo Datasheet4U.com

TUSB1210-Q1 - Stand-Alone USB Transceiver

General Description

The TUSB1210-Q1 is a USB2.0 transceiver chip, designed to interface with a USB controller via a ULPI interface.

It supports all USB2.0 data rates (HighSpeed 480 Mbps, Full-Speed 12 Mbps and LowSpeed 1.5 Mbps), and is compliant to both Host and Peripheral modes.

Key Features

  • 1 AEC-Q100 Qualified with:.
  • Temperature Grade 3:.
  • 40°C to 85°C.
  • HBM ESD Classification 1C.
  • CDM ESD Classification C4B.
  • USB2.0 PHY Transceiver Chip, Designed to Interface with a USB Controller via a ULPI 12-pin Interface, Fully Compliant With:.
  • Universal Serial Bus Specification Rev. 2.0.
  • On-The-Go Supplement to the USB 2.0 Specification Rev. 1.3.
  • UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1.
  • DP/DM L.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TUSD05H4U Ultra Low Capacitance ESD Protection Array KUU

Other Datasheets by Texas Instruments

Part Number Description
TUSB1210 Stand-Alone USB Transceiver
TUSB1211 Stand-Alone USB Transceiver
TUSB1002 Dual-Channel Linear Redriver
TUSB1042I 2:1 Linear Redriver Switch
TUSB1044 Multi-Protocol Bi-Directional Linear Redriver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community TUSB1210-Q1 SLLSEL4A – SEPTEMBER 2014 – REVISED OCTOBER 2014 TUSB1210-Q1 Standalone USB Transceiver Chip Silicon 1 Features •1 AEC-Q100 Qualified with: – Temperature Grade 3: –40°C to 85°C – HBM ESD Classification 1C – CDM ESD Classification C4B • USB2.0 PHY Transceiver Chip, Designed to Interface with a USB Controller via a ULPI 12-pin Interface, Fully Compliant With: – Universal Serial Bus Specification Rev. 2.0 – On-The-Go Supplement to the USB 2.0 Specification Rev. 1.3 – UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.