TUSB1210 Description
The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is pliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes.
TUSB1210 Key Features
- Universal Serial Bus Specification Rev. 2.0
- On-The-Go Supplement to the USB 2.0 Specification Rev. 1.3
- UTMI+ Low Pin Interface (ULPI) Specification Rev. 1.1
- ULPI 12-pin SDR Interface
- DP/DM Line External ponent pensation (Patent #US7965100 B1)
- Interfaces to Host, Peripheral and OTG Device Cores; Optimized for Portable Devices or System ASICs With Built-in USB OT
- plete USB OTG Physical Front-End That Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
- VBUS Overvoltage Protection Circuitry Protects VBUS Pin in Range -2 V to 20 V
- Internal 5-V Short-Circuit Protection of DP, DM, and ID Pins for Cable Shorting to VBUS Pin
- ULPI Interface