900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

TUSB1310A Datasheet Preview

TUSB1310A Datasheet

USB3.0 Transceiver

No Preview Available !

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TUSB1310A
SLLSE32G – NOVEMBER 2010 – REVISED NOVEMBER 2017
TUSB1310A USB 3.0 Transceiver
Not Recommended for New Designs
1 Device Overview
1.1 Features
1 Universal Serial Bus (USB)
– Single Port 5.0-Gbps USB 3.0 Physical Layer
Transceiver
– One 5.0-Gbps SuperSpeed Connection
– One 480-Mbps HS/FS/LS Connection
– Fully Compliant With USB 3.0 Specification,
Revision 1.0
– Supports 3+ Meters USB 3.0 Cable Length
– Fully Adaptive Equalizer to Optimize Receiver
Sensitivity
– PIPE to Link-Layer Controller
– Supports 16-Bit SDR Mode at 250 MHz
– Compliant With PHY Interface for the USB
Architectures (PIPE), Version 3.0
– ULPI to Link-Layer Controller
– Supports 8-Bit SDR Mode at 60 MHz
– Supports Synchronous Mode and Low-Power
Mode
– Compliant With UTMI+ Low Pin Interface
(ULPI) Specification, Revision 1.1
• General Features
– IEEE 1149.1 JTAG Support
– IEEE 1149.6 JTAG support for the SuperSpeed
Port
– Operates on One Reference Clock of 40 MHz
– 3.3-, 1.8-, and 1.1-V Supply Voltages
– 1.8-V PIPE and ULPI I/O
– Available in Lead-Free 175-Ball 12- × 12-nF
NFBGA Package (ZAY)
1.2 Applications
• Surveillance Cameras
• Digital Still Cameras
• Multimedia Handsets
• Phones and Smartphones
• Portable Media Players
• Personal Navigation Devices
• Audio Docks
• Video- and Wireless-IP Phones
• Software Defined Radios
1.3 Description
The TUSB1310A device is one port, 5.0-Gbps USB 3.0 physical layer transceiver that operates off of one
reference clock, which is provided by either a crystal or an external reference clock. The reference clock
frequencies are selectable from 20, 25, 30, and 40 MHz. The TUSB1310A device provides the clock to the
USB controller. The use of one reference clock allows the TUSB1310A device to provide a cost-effective
USB 3.0 solution with few external components and a low implementation cost.
The USB controller interfaces to the TUSB1310A device through a PIPE (SuperSpeed) and a ULPI (USB
2.0) interface. The 16-bit PIPE operates off of a 250-MHz interface clock. The ULPI supports 8-bit
operations with a 60-MHz interface clock.
USB 3.0 reduces active and idle power consumption with improved power-management features. The low-
power states of the TUSB1310A device are controlled by the USB controller through the PIPE interface.
SuperSpeed USB uses existing USB software infrastructure by keeping the existing software interfaces
and software drivers intact. In addition, SuperSpeed USB retains backward compatibility with USB 2.0
based products by using the same form-factor Type-A connector and cables. Existing USB 2.0 devices
work with new USB 3.0 hosts and new USB 3.0 devices with work with legacy USB 2.0 hosts.
PART NUMBER
Device Information(1)
PACKAGE
TUSB1310A
NFBGA (175)
(1) For all available packages, see the orderable addendum at the end of the data sheet.
BODY SIZE (NOM)
12.00 mm × 12.00 mm
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

TUSB1310A Datasheet Preview

TUSB1310A Datasheet

USB3.0 Transceiver

No Preview Available !

Not Recommended for New Designs
TUSB1310A
SLLSE32G – NOVEMBER 2010 – REVISED NOVEMBER 2017
1.4 Functional Block Diagram
PIPE Interface
REFERENCE
CLOCK
CLKOUT
ULPI Interface
PIPE Interface
x8
8b, 10b
encoding
x8
8b, 10b
decoding
x10
x10
Elastic
Buffer
Parallel
to Serial
x1
x10
Serial to
Parallel
x1
Data
Recovery
Circuit
Crystal
Oscillator
SSCG
and PLL
Clock
Generator
K28.5
Detection
ULPI Interface
ULPI
Registers
Loopback,
BIST
Disconnect
Detect
Receiver
Transmitter
CDR
Transmitter
Differential
Driver
Differential
Receiver and
Equalization
JTAG
Boundary
Scan
Differential Driver
and Receiver
5
SSTXP SSTXN SSRXP SSRXN
JTAG
DP DM
Figure 1-1. Functional Block Diagram
www.ti.com
2
Device Overview
Submit Documentation Feedback
Product Folder Links: TUSB1310A
Copyright © 2010–2017, Texas Instruments Incorporated



Part Number TUSB1310A
Description USB3.0 Transceiver
Maker etcTI
Total Page 3 Pages
PDF Download

TUSB1310A Datasheet PDF





Similar Datasheet

1 TUSB1310 USB3.0 Transceiver
etcTI
2 TUSB1310A USB3.0 Transceiver
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy