900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

TUSB213 Datasheet Preview

TUSB213 Datasheet

USB 2.0 High Speed Signal Conditioner

No Preview Available !

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
TUSB213
SLLSEX6B – AUGUST 2017 – REVISED SEPTEMBER 2017
TUSB213 USB 2.0 High Speed Signal Conditioner
1 Features
1 Compatible with USB 2.0, OTG 2.0 and BC 1.2
• Pin strap or I2C Configurable
• Support for LS, FS, HS signaling
• Ultra-low USB Disconnect and Shutdown Power
Consumption
• Scalable solution - Daisy Chain Device for High
Loss Applications
• D1P/M and D2P/M Interchangeable and
Host/Device Agnostic
• Supports up to 5m pre-channel or 2m post-
channel Cable Length
– Four Selectable AC Boost Setting Via External
Pulldown Resistor
– DC Boost Along With AC Boost for Best Signal
Integrity
2 Applications
• Notebooks
• Desktops
• Docking Stations
• Tablets
• Cell Phones
• Active Cable, Cable Extenders
• Backplane
• Televisions
SPACER
SPACER
3 Description
The TUSB213 is a USB High-Speed (HS) signal
conditioner, designed to compensate for ISI signal
loss in a transmission channel which helps passing
USB electrical compliance tests.
TUSB213 has a patent-pending design which is
agnostic to USB Low Speed (LS) and Full Speed
(FS) signals. LS and FS signal characteristics are
unaffected by the TUSB213 while HS signals are
compensated.
Programmable signal AC boost and DC boost permits
fine tuning device performance to optimize High
Speed signals at the connector, this allows use in
many different applications.
In addition, TUSB213 is compatible with the USB On-
The-Go (OTG) and Battery Charging (BC) protocols.
Device Information (1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
TUSB213
TUSB213I
VQFN (14)
3.50 mm x 3.50 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Simplified Schematic
5V
VCC
DP
USB Host
DM
Cable
D1P D2P
D1M D2M
GND
DP USB
DM Connector
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

TUSB213 Datasheet Preview

TUSB213 Datasheet

USB 2.0 High Speed Signal Conditioner

No Preview Available !

TUSB213
SLLSEX6B – AUGUST 2017 – REVISED SEPTEMBER 2017
www.ti.com
Table of Contents
1 Features .................................................................. 1
2 Applications ........................................................... 1
3 Description ............................................................. 1
4 Revision History..................................................... 2
5 Pin Configuration and Functions ......................... 3
6 Specifications......................................................... 4
6.1 Absolute Maximum Ratings ...................................... 4
6.2 ESD Ratings.............................................................. 4
6.3 Recommended Operating Conditions....................... 4
6.4 Thermal Information .................................................. 5
6.5 Electrical Characteristics........................................... 5
6.6 Switching Characteristics .......................................... 6
6.7 Typical Characteristics .............................................. 7
7 Detailed Description .............................................. 8
7.1 Overview ................................................................... 8
7.2 Functional Block Diagram ......................................... 8
7.3 Feature Description................................................... 8
7.4 Device Functional Modes.......................................... 8
8 Application and Implementation ........................ 10
8.1 Application Information............................................ 10
8.2 Typical Application ................................................. 10
9 Power Supply Recommendations...................... 17
10 Layout................................................................... 18
10.1 Layout Guidelines ................................................. 18
10.2 Layout Example .................................................... 18
11 Device and Documentation Support ................. 19
11.1 Receiving Notification of Documentation Updates 19
11.2 Community Resources.......................................... 19
11.3 Trademarks ........................................................... 19
11.4 Electrostatic Discharge Caution ............................ 19
11.5 Glossary ................................................................ 19
12 Mechanical, Packaging, and Orderable
Information ........................................................... 19
4 Revision History
Changes from Revision A (August 2017) to Revision B
Page
• Changed Note From: Pull-up resistors for SDA and SCL pins in I2C mode should be 2 kΩ (5%). To: Pull-up resistors
for SDA and SCL pins in I2C mode should be 4.7 kΩ (5%) in the Pin Functions table.......................................................... 3
• Added Test Conditions to RSTN: VIH and VIL in the Electrical Characteristics table.............................................................. 5
• Added new parameters to SCL/SDA: VIH, VIL, VSDA_OL, ISDA_OL the Electrical Characteristics table ..................................... 5
• Added Test Conditions To: DC_BOOST: VIH, VIM, and VIL the Electrical Characteristics table ............................................. 5
• Added test conditions to trise_dxx and tfall_dxx in the Switching Characteristics table ................................................................. 6
Changes from Original (August 2017) to Revision A
Page
• Changed CIO_DXX TYP value From: 7 pF To: 2.7 pF in the Electrical Characteristics table ................................................... 6
2 Submit Documentation Feedback
Product Folder Links: TUSB213
Copyright © 2017, Texas Instruments Incorporated


Part Number TUSB213
Description USB 2.0 High Speed Signal Conditioner
Maker etcTI
Total Page 27 Pages
PDF Download

TUSB213 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 TUSB211 USB 2.0 High Speed Signal Conditioner
etcTI
2 TUSB211I USB 2.0 High Speed Signal Conditioner
etcTI
3 TUSB212 USB 2.0 High Speed Signal Conditioner
etcTI
4 TUSB213 USB 2.0 High Speed Signal Conditioner
etcTI
5 TUSB2136 Universal Serial Bus Compound Hub With General-Purpose 8052 MCU (Rev. E)
ETCTI
6 TUSB214 USB 2.0 High Speed Signal Conditioner
ETCTI
7 TUSB215 USB 2.0 High Speed Signal Conditioner
ETCTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy