Datasheet4U Logo Datasheet4U.com

UCC21541 - Reinforced Isolation Dual-Channel Gate Driver

This page provides the datasheet information for the UCC21541, a member of the UCC21540 Reinforced Isolation Dual-Channel Gate Driver family.

Description

The UCC2154x is an isolated dual channel gate driver family designed with up to 4-A/6-A peak source/sink current to drive power MOSFET, IGBT, and GaN transistors.

UCC2154x in DWK package also offers 3.3-mm minimum channel-to-channel spacing which facilitates higher bus voltage.

Features

  • Wide body package options.
  • DW SOIC-16: pin-2-pin to UCC21520.
  • DWK SOIC-14: 3.3 mm Ch-2-Ch spacing.
  • Up to 4-A peak source and 6-A peak sink output.
  • Up to 18-V VDD output drive supply.
  • 5-V and 8-V VDD UVLO Options.
  • CMTI greater than 100 V/ns.
  • Switching parameters:.
  • 40-ns maximum propagation delay.
  • 5-ns maximum delay matching.
  • 5.5-ns maximum pulse-width distortion.
  • 35-µs maximum VDD power-up.

📥 Download Datasheet

Datasheet preview – UCC21541

Datasheet Details

Part number UCC21541
Manufacturer Texas Instruments
File Size 2.54 MB
Description Reinforced Isolation Dual-Channel Gate Driver
Datasheet download datasheet UCC21541 Datasheet
Additional preview pages of the UCC21541 datasheet.

📁 Similar Datasheet

  • UCC2105 - CC/CV MODE STEP DOWN SWITCHING REGULATOR (UTC)
  • UCC25701 - Advanced Voltage Mode Pulse Width Modulator (Unitrode)
  • UCC25702 - Advanced Voltage Mode Pulse Width Modulator (Unitrode)
  • UCC2581 - Micropower Voltage Mode PWM (Unitrode)
  • UCC2583 - (UCC1583 - UCC3583) Switch Mode Secondary Side Post Regulator (Unitrode)
  • UCC2750 - Source Ringer Controller (Unitrode)
  • UCC27519DBVR - 4A Single-Channel Non-Inverting Gate Driver (UMW)
  • UCC2807-1 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)
  • UCC2807-2 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)
  • UCC2807-3 - Programmable Maximum Duty Cycle PWM Controller (Unitrode)
Other Datasheets by Texas Instruments

Full PDF Text Transcription

Click to expand full text
www.ti.com UCC21540, UCC21540A, UCC21541, UCC21542 USLCUCS2D1E15D40–,NUOCVECM2B1E5R4200A18, U– RCECV2IS1E5D4F1E,BURCUACR2Y12504221 SLUSDE1D – NOVEMBER 2018 – REVISED FEBRUARY 2021 UCC2154x Reinforced Isolation Dual-Channel Gate Driver With 3.3-mm Channel-to-Channel Spacing Option 1 Features • Wide body package options – DW SOIC-16: pin-2-pin to UCC21520 – DWK SOIC-14: 3.3 mm Ch-2-Ch spacing • Up to 4-A peak source and 6-A peak sink output • Up to 18-V VDD output drive supply – 5-V and 8-V VDD UVLO Options • CMTI greater than 100 V/ns • Switching parameters: – 40-ns maximum propagation delay – 5-ns maximum delay matching – 5.
Published: |