Datasheet4U Logo Datasheet4U.com

UCC2895-EP - Phase-Shift PWM Controller

General Description

The UCC2895-EP is a phase-shift pulse-width modulation (PWM) controller that implements control of a full-bridge power stage by phase shifting the switching of one half bridge with respect to the other.

Key Features

  • 1 Programmable Output Turnon Delay.
  • Adaptive Delay Set.
  • Bidirectional Oscillator Synchronization.
  • Capability for Voltage-Mode or Current-Mode Control.
  • Programmable Soft Start/Soft Stop and Chip Disable Via a Single Pin.
  • 0% to 100% Duty-Cycle Control.
  • 7-MHz Error Amplifier.
  • Operation to 1 MHz.
  • Low-Active Current Consumption (5-mA Typ at 500 kHz).
  • Very-Low-Current Consumption During Undervoltage Lockout (150-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCC2895 BiCMOS Advanced Phase Shift PWM Controller Unitrode
UCC2807-1 Programmable Maximum Duty Cycle PWM Controller Unitrode
UCC2807-2 Programmable Maximum Duty Cycle PWM Controller Unitrode
UCC2807-3 Programmable Maximum Duty Cycle PWM Controller Unitrode
UCC2808-1 Low Power Current Mode Push-Pull PWM Unitrode

Other Datasheets by Texas Instruments

Part Number Description
UCC2895-Q1 Phase-Shift PWM Controller
UCC2895 Phase-Shift PWM Controller
UCC28950 Green Phase-Shifted Full-Bridge Controller
UCC28950-Q1 Green Phase-Shifted Full-Bridge Controller
UCC2891 Active Clamp PWM Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community UCC2895-EP SCBS809G – DECEMBER 2005 – REVISED SEPTEMBER 2017 UCC2895-EP BiCMOS Advanced Phase-Shift PWM Controller 1 Features •1 Programmable Output Turnon Delay • Adaptive Delay Set • Bidirectional Oscillator Synchronization • Capability for Voltage-Mode or Current-Mode Control • Programmable Soft Start/Soft Stop and Chip Disable Via a Single Pin • 0% to 100% Duty-Cycle Control • 7-MHz Error Amplifier • Operation to 1 MHz • Low-Active Current Consumption (5-mA Typ at 500 kHz) • Very-Low-Current Consumption During Undervoltage Lockout (150-μA Typ) • Supports Defense, Aerospace, and Medical Applications: – Controlled Baseline – One Assembly/Test Site – One Fabrication Site – Available in Military (–55°C