bq24770 Datasheet | Texas Instruments

Features - 1 Host-controlled NVDC-1 1S-4S Battery Charge Controller with 4.5-24 V Input Range - Support SMBus (bq24770) and I2C (bq24773) - System Instant-on Operation with no Battery or Deeply Discharged Battery - Supplement Mode with Synchronous BATFET Control when Adaptor is fully loaded - Ultra Fast Input Current DPM at 100 μs - Ultra Low Quiescent Current of 600 µA and High PFM Light Load Efficiency >80% at 20 m A Load to Meet Energy Star and Er P Lot6. - High Accuracy Power / Current Monitor for CPU Throttling - prehensive PROCHOT Profile - Input and Battery Current Monitor (IADP/IBAT) - System Power Monitor (PMON) - Programmable Input Current Limit, Charge Voltage, Charge Current and Minimum System Voltage Regulation - ±0.5% Charge Voltage (16 m V/step) - ±2% Input/charge Current (64 m A/step) - ±2% 40x Input / 16x Discharge / 20x Charge Current Monitor - Support Battery LEARN Function - High Integration - NMOS ACFET and RBFET Driver - PMOS battery FET Gate Driver - Internal Loop pensation - Independent parator - Automatic Trickle Charge to Wake up Gas Gauge - 600k Hz to 1.2MHz Programmable Switching Frequency Simplified Schematic Adapter 4.5-24V N-FET Driver Enhanced Safety: OCP, OVP, FET Short Adapter Detection bq24770 SMBus Controls V and I with high accuracy SMBus NVDC Charge Controller HOST IADP, IDCHG, PMON, PROCHOT SYS P-FET Driver RSR Copyright © 2016, Texas Instruments...