MYMGA5R03ECLA5RA
MYMGA5R03ECLA5RA is 3.5A DC-DC Converter manufactured by Murata.
Description
The MYMGA5R03ECLA5RA is miniature Mono BK™ called “Mono Block”, non-isolated Pointof-Load (Po L) DC-DC power converters for embedded applications. The small form factor measures only 10.5 x 9.0 x 5.6mm. The converters have input voltage ranges of 8.0 to 28.8V (absolute maximum input voltage: 40.0V) and a maximum output current of 3.5A. The Po L module features settable output voltage 3.3 to 5.0V, On/Off control and Power Good (PGOOD) signal output. This product also includes under voltage lock out (UVLO), output short circuit protection (SCP), overcurrent protection (OCP).
Features
- Input voltage ranges from 8.0 to 28.8V (Absolute maximum input voltage: 40.0V)
- Settable output voltage from 3.3 to 5.0V
- Up to 4A of output current
(8.0-16.0VIN: 4A, 16.0-28.8VIN: 3.5A)
- Quick response to load change
- Ultra small surface mount package
10.5 x 9.0 x 5.6mm
- High efficiency of 96%(max),
93%(24.0Vin/5.0Vout/3.5Aout)
- Outstanding thermal derating performance
- Over Current protection (OCP)
- Short circuit protection (SCP)
- On/Off control (Positive logic)
- Power Good (PGOOD) signal
Typical Applications
- PCIe / Server applications
- FPGA and DSP
- Data / Tele systems
- Distributed bus architectures (DBA)
- Programmable logic and mixed voltage
Document Category: Datasheet
Mono BK™ 3.5A DC-DC Converter
Efficiency
VIN = 24.0V, VOUT = 5.0V, TA = 25deg C
Figure 1. Efficiency Curve
Simplified Application Circuit
Figure 2. Simplified Circuit Diagram http://.murata./products/power
Copyright ©2023 Murata Manufacturing Co., Ltd. All rights reserved. Specifications are subject to change without notice.
Document Number: D90DH
- 00217 / Export Control Code : X0863 MYMGA5R03ECLA5RA A01 (May-2023) Page 1 of 28
Product Description
Features
Typical Applications...
