Datasheet4U Logo Datasheet4U.com

74AHCT07A - Hex buffer

General Description

The 74AHCT07A is a hex buffer with open-drain outputs.

The outputs are open-drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions.

Key Features

  • Direct interface with TTL levels.
  • Supply voltage range from 4.5 V to 5.5 V.
  • Typical tPZL of 3.4 ns at 5 V.
  • Typical VOL(p) < 0.8 V at VCC = 5 V, Tamb = 25 C.
  • Supports mixed-mode voltage operation on all ports.
  • IOFF circuitry provides partial Power-down mode operation.
  • Latch-up performance exceeds 250 mA per JESD 78 Class II.
  • ESD protection:.
  • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 3 kV.
  • MM JESD22-A115-A exceeds 150 V.
  • CDM JESD22-C101E ex.

📥 Download Datasheet

Other Datasheets by Nexperia

Part Number Description
74AHCT00 Quad 2-input NAND gate
74AHCT00-Q100 Quad 2-input NAND gate
74AHCT00BQ Quad 2-input NAND gate
74AHCT00D Quad 2-input NAND gate
74AHCT00PW Quad 2-input NAND gate
74AHCT02 Quad 2-input NOR gate
74AHCT02-Q100 Quad 2-input NOR gate
74AHCT02BQ Quad 2-input NOR gate
74AHCT02D Quad 2-input NOR gate
74AHCT02PW Quad 2-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AHCT07A Hex buffer with open-drain outputs Rev. 1 — 19 December 2016 Product data sheet 1. General description The 74AHCT07A is a hex buffer with open-drain outputs. The outputs are open-drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Designed to operate over a VCC range from 4.5 V to 5.5 V, the inputs are TTL compatible, which allows the device to be used to translate from 3.3 V to 5 V. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial Power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2.