74AUP1T14
74AUP1T14 is Low-power inverter manufactured by Nexperia.
description
The 74AUP1T14 provides a single inverting function. This device ensures a very low static and dynamic power consumption across the entire VCC range from 2.3 V to 3.6 V.
The 74AUP1T14 is designed for logic-level translation applications with input switching levels that accept 1.8 V low-voltage CMOS signals, while operating from either a single 2.5 V or 3.3 V supply voltage.
The wide supply voltage range ensures normal operation as battery voltage drops from 3.6 V to 2.3 V.
This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.
Schmitt trigger inputs make the circuit tolerant to slower input rise and fall times across the entire VCC range.
2. Features and benefits
- Wide supply voltage range from 2.3 V to 3.6 V
- High noise immunity
- ESD protection:
- HBM JESD22-A114F Class 3A exceeds 5000 V
- CDM JESD22-C101E exceeds 1000 V
- Low static power consumption; ICC = 1.5 μA (maximum)
- Latch-up performance exceeds 100 m A per JESD 78 Class II
- Inputs accept voltages up to 3.6 V
- Low noise overshoot and undershoot < 10 % of VCC
- IOFF circuitry provides partial power-down mode operation
- Specified from -40 °C to +85 °C and -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information Type number Package
Temperature range Name 74AUP1T14GW -40 °C to +125 °C TSSOP5
74AUP1T14GX -40 °C to +125 °C X2SON5
Description plastic thin shrink small outline package; 5 leads; body width 1.25 mm plastic thermal enhanced extremely thin small outline package; no leads; 5 terminals; body 0.8 × 0.8 × 0.32 mm
Version SOT353-1
SOT1226-3
Nexperia
Low-power inverter with voltage-level translator
4. Marking
Table 2. Marking Type number 74AUP1T14GW 74AUP1T14GX
Marking code[1] 56 56
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional...
