Datasheet4U Logo Datasheet4U.com

74AVC1T45 - Dual-supply voltage level translator/transceiver

Description

The 74AVC1T45 is a single bit, dual supply transceiver with 3-state output that enables bidirectional level translation.

Features

  • Wide supply voltage range:.
  • VCC(A): 0.8 V to 3.6 V.
  • VCC(B): 0.8 V to 3.6 V.
  • High noise immunity.
  • CMOS low power dissipation.
  • Complies with JEDEC standards:.
  • JESD8-12 (0.8 V to 1.3 V).
  • JESD8-11( 0.9 V to 1.65 V).
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8C (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM JESD22-A114E Class 3B exceeds 8000 V.
  • MM JESD22-A115-A exceed.

📥 Download Datasheet

Datasheet Details

Part number 74AVC1T45
Manufacturer Nexperia
File Size 319.89 KB
Description Dual-supply voltage level translator/transceiver
Datasheet download datasheet 74AVC1T45 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AVC1T45 SINGLE BIT DUAL POWER SUPPLY TRANSLATING TRANSCEIVER Diodes
74AVC1T45 Dual-supply voltage level translator/transceiver NXP
74AVC16244 16-bit buffer/line driver NXP
74AVC16245 16-bit transceiver NXP
74AVC16334A 16-bit registered driver NXP Semiconductors

Other Datasheets by Nexperia

Part Number Description
74AVC1T45-Q100 Dual-supply voltage level translator/transceiver
74AVC1T1004 1-to-4 fan-out buffer
74AVC1T1022 1-to-4 fan-out buffer
74AVC1T8128 Single dual-supply translating 2-input NOR
74AVC1T8832 Single dual-supply translating 2-input OR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AVC1T45 Dual-supply voltage level translator/transceiver; 3-state Rev. 10 — 2 February 2022 Product data sheet 1. General description The 74AVC1T45 is a single bit, dual supply transceiver with 3-state output that enables bidirectional level translation. It features two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins A and DIR are referenced to VCC(A) and pin B is referenced to VCC(B). A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A.
Published: |