74AVC2T245 Datasheet | Nexperia

2-bit dual supply translating transceiver with configurable voltage translation; 3-state Rev. 3 - 2 July 2024 Product data sheet 1. General description The 74AVC2T245 is a 2-bit, dual supply transceiver that enables bidirectional level translation. The device can be used as two 1-bit transceivers or as a 2-bit transceiver. It Features two 2-bit input-output ports (An and Bn) and direction control inputs (DIRn), an output enable input (OE) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins An, OE and DIRn are referenced to VCC(A) and pins Bn are referenced to VCC(B). A HIGH on DIRn allows transmission from An to Bn and a LOW on DIRn allows transmission from Bn to An. The output enable input (OE) can be used to disable the outputs so the buses are effectively isolated. The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCC(A) or VCC(B) are at GND level, both An and Bn are in the high-impedance OFF-state. 2. Features and benefits - Wide supply voltage range: - VCC(A): 0.8 V to 3.6 V - VCC(B): 0.8 V to 3.6 V - plies with JEDEC standards: - JESD8-12 (0.8 V to 1.3 V) - JESD8-11 (0.9 V to 1.65 V) - JESD8-7 (1.2 V to 1.95 V) - JESD8-5 (1.8 V to 2.7 V) - JESD8-B (2.7 V to 3.6 V) - Maximum data rates: - 380 Mbit/s (≥ 1.8 V to 3.3 V translation) - 200 Mbit/s (≥ 1.1 V to 3.3 V translation) - 200 Mbit/s (≥ 1.1 V to 2.5 V translation) - 200 Mbit/s (≥ 1.1 V to 1.8 V translation) - 150 Mbit/s (≥ 1.1 V to 1.5 V translation) - 100 Mbit/s (≥ 1.1 V to 1.2 V translation) - Suspend mode - Latch-up performance exceeds 100 m A per JESD 78 Class II - Inputs accept voltages up to 3.6 V - IOFF...