Datasheet4U Logo Datasheet4U.com

74AXP1G157 - Single 2-input multiplexer

Description

The 74AXP1G157 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S).

The state of the common data select input determines the particular register from which the data comes.

Features

  • Wide supply voltage range from 0.7 V to 2.75 V.
  • Low input capacitance; CI = 0.5 pF (typical).
  • Low output capacitance; CO = 1.0 pF (typical).
  • Low dynamic power consumption; CPD = 2.5 pF at VCC = 1.2 V (typical).
  • Low static power consumption; ICC = 0.6 A (85 C maximum).
  • High noise immunity.
  • Complies with JEDEC standard:.
  • JESD8-12A.01 (1.1 V to 1.3 V).
  • JESD8-11A.01 (1.4 V to 1.6 V).
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A.01 (2.3 V to 2.7 V).

📥 Download Datasheet

📁 Similar Datasheet

  • 74ABT00 - Quad 2-input NAND gate (NXP)
  • 74ABT00 - Quad 2-input NAND gate (Philips)
  • 74ABT02 - Quad 2-input NOR gate (NXP)
  • 74ABT04 - Hex inverter (NXP)
  • 74ABT04 - Hex inverter (Philips)
  • 74ABT08 - Quad 2-input AND gate (NXP)
  • 74ABT08 - Quad 2-input AND gate (Philips)
  • 74ABT10 - Triple 3-input NAND gate (NXP)
  • 74ABT125 - Quad buffer (NXP)
  • 74ABT125 - Quad Buffer (Fairchild Semiconductor)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74AXP1G157 Single 2-input multiplexer Rev. 1 — 27 October 2015 Product data sheet 1. General description The 74AXP1G157 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the true (non-inverted) form. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device ensures very low static and dynamic power consumption across the entire VCC range from 0.7 V to 2.75 V. It is fully specified for partial power down applications using IOFF.
Published: |