Datasheet4U Logo Datasheet4U.com

74HC251-Q100 - 8-input multiplexer

Description

The 74HC251-Q100; 74HCT251-Q100 is an 8-bit multiplexer with eight binary inputs (I0 to I7), three select inputs (S0 to S2) and an output enable input (OE).

The select inputs select one of the eight binary inputs and route it to the complementary outputs (Y and Y).

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Input levels:.
  • For 74HC2.

📥 Download Datasheet

📁 Similar Datasheet

  • 74HC251 - Data Selectors/Multiplexers (Texas Instruments)
  • 74HC251 - 8-input multiplexer (Philips)
  • 74HC253 - Dual 4-input multiplexer (Philips)
  • 74HC257 - Quad 2-Input Data Selector/Multiplexer (Motorola)
  • 74HC257 - Quad. 2-to-1-line Data Selectors/Multiplexers (Hitachi)
  • 74HC257 - Quad 2-input multiplexer (Philips)
  • 74HC257 - High-Speed CMOS Logic Quad 2-Input Multiplexer (Texas Instruments)
  • 74HC258 - Quad 2-input multiplexer (Philips)
  • 74HC259 - 8-Bit Addressable Latches (Texas Instruments)
  • 74HC259D - 8-Bit Addressable Latch (Toshiba)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC251-Q100; 74HCT251-Q100 8-input multiplexer; 3-state Rev. 3 — 8 February 2021 Product data sheet 1. General description The 74HC251-Q100; 74HCT251-Q100 is an 8-bit multiplexer with eight binary inputs (I0 to I7), three select inputs (S0 to S2) and an output enable input (OE). The select inputs select one of the eight binary inputs and route it to the complementary outputs (Y and Y). A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |