Datasheet4U Logo Datasheet4U.com

74HC2G125-Q100 - Dual buffer/line driver

Description

The 74HC2G125-Q100; 74HC2G125-Q100 are dual buffer/line drivers with 3-state outputs controlled by the output enable inputs (nOE).

Inputs include clamp diodes which enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • Input levels:.
  • For 74HC2G125-Q100: CMOS level.
  • For 74HCT2G125-Q100: TTL level.
  • Symmetrical output impedance.
  • High noise immunity.
  • Low power dissipation.
  • Balanced propagation delays.
  • ESD protection:.
  • MIL-STD-883,.

📥 Download Datasheet

📁 Similar Datasheet

  • 74HC2G125 - Dual buffer/line driver (NXP)
  • 74HC2G126 - Dual buffer/line driver (Philips)
  • 74HC2G126 - Dual buffer/line driver (NXP)
  • 74HC2G17 - Dual non-Inverting Schmitt Trigger (NXP)
  • 74HC2G00 - Dual 2-input NAND gate (Philips)
  • 74HC2G02 - Dual 2-input NOR gate (NXP)
  • 74HC2G08 - Dual 2-input AND gate (Philips)
  • 74HC2G32 - Dual 2-input OR gate (Philips)
  • 74HC2G34 - Dual Buffer Gate (NXP)
  • 74HC2G66 - Dual single-pole single-throw analog switch (NXP Semiconductors)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC2G125-Q100; 74HCT2G125-Q100 Dual buffer/line driver; 3-state Rev. 2 — 1 November 2018 Product data sheet 1. General description The 74HC2G125-Q100; 74HC2G125-Q100 are dual buffer/line drivers with 3-state outputs controlled by the output enable inputs (nOE). Inputs include clamp diodes which enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits • Automotive product qualification in accordance with AEC-Q100 (Grade 1) • Specified from -40 °C to +85 °C and from -40 °C to +125 °C • Wide supply voltage range from 2.0 V to 6.
Published: |