74HC4067-Q100 Datasheet PDF (16-channel analog multiplexer/demultiplexer)

74HC4067-Q100 - 16-channel analog multiplexer/demultiplexer

Description

The 74HC4067-Q100; 74HCT4067-Q100 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications.

Features

Automotive product qualification in accordance with AEC-Q100 (Grade 1).
Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
Wide supply voltage range from 2.0 V to 10.0 V.
Input levels S0, S1, S2, S3 and E inputs:.
For 74HC4067-Q100: CMOS level.
For 74HCT4067-Q100: TTL level.
CMOS low power dissipation.
High noise immunity.
Typical ‘break before make’ built-in.
Low ON resistance:.
80 Ω (ty.

Datasheet Details

Part number	74HC4067-Q100
Manufacturer	nexperia
File Size	346.31 KB
Description	16-channel analog multiplexer/demultiplexer
Datasheet	74HC4067-Q100 Datasheet

📁 Similar Datasheet

74HC4067 - 16-Channel Analog Multiplexer / Demultiplexer (NXP)

74HC4060 - 14-STAGE ASYNCHRONOUS BINARY COUNTERS/OSCILLATORS (Texas Instruments)

74HC4060 - 14-stage binary ripple counter (NXP Semiconductors)

74HC4060-Q100 - 14-stage binary ripple counter (NXP)

74HC4066 - Quad single-pole single-throw analog switch (NXP)

74HC4066 - High-Speed CMOS Logic Quad Bilateral Switch (Texas Instruments)

74HC4066D - Quad Bilateral Switch (Toshiba)

74HC4066D - High-Speed CMOS Logic Quad Bilateral Switch (Texas Instruments)

74HC4066DB - High-Speed CMOS Logic Quad Bilateral Switch (Texas Instruments)

74HC4066FT - Quad Bilateral Switch (Toshiba)

Full PDF Text Transcription

Click to expand full text

74HC4067-Q100; 74HCT4067-Q100 16-channel analog multiplexer/demultiplexer Rev. 2 — 2 June 2020 Product data sheet 1. General description The 74HC4067-Q100; 74HCT4067-Q100 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications. The switch features four digital select inputs (S0, S1, S2 and S3), sixteen independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Published: Jul 29, 2019 |