Datasheet4U Logo Datasheet4U.com

74HC5555D - Programmable delay timer

This page provides the datasheet information for the 74HC5555D, a member of the 74HC5555 Programmable delay timer family.

Description

The 74HC5555 is a precision programmable delay timer which consist of: 24-stage binary counter integrated oscillator (using external timing components) retriggerable/non-retriggerable monostable automatic power-ON reset output control logic

Features

  • Supply voltage range from 2.0 V to 6.0 V.
  • CMOS input levels.
  • Positive and negative edge triggered.
  • Retriggerable or non-retriggerable.
  • Programmable delay:.
  • minimum: 100 ns.
  • maximum: depends on input frequency and division ratio.
  • Divide-by range of 2 to 224.
  • Direct reset terminates output pulse.
  • Very low power consumption in triggered start mode.
  • 3 oscillator operating modes:.
  • RC oscillato.

📥 Download Datasheet

Datasheet preview – 74HC5555D

Datasheet Details

Part number 74HC5555D
Manufacturer nexperia
File Size 301.16 KB
Description Programmable delay timer
Datasheet download datasheet 74HC5555D Datasheet
Additional preview pages of the 74HC5555D datasheet.

📁 Similar Datasheet

  • 74HC5555 - Programmable delay timer (Philips)
  • 74HC51 - 2-wide 2-input / 2-wide 3-input AND-OR-INVERT Gate (Hitachi)
  • 74HC51 - DUAL 2 WIDE 2 INPUT AND/OR INVERT GATE (STMicroelectronics)
  • 74HC533 - Octal D-type transparent latch (Philips)
  • 74HC534 - Octal D-type flip-flop (Philips)
  • 74HC540 - Octal Buffers and Line Drivers (Texas Instruments)
  • 74HC540 - Octal Bus Buffer Inverting (ST Microelectronics)
  • 74HC540D - Octal Bus Buffer (Toshiba)
  • 74HC541 - OCTAL BUS BUFFER (STMicroelectronics)
  • 74HC541 - Octal Buffers/Line Drivers (Hitachi)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC5555 Programmable delay timer with oscillator Rev. 4 — 5 July 2018 Product data sheet 1 General description The 74HC5555 is a precision programmable delay timer which consist of: • 24-stage binary counter • integrated oscillator (using external timing components) • retriggerable/non-retriggerable monostable • automatic power-ON reset • output control logic • oscillator control logic • overriding asynchronous master reset (MR). The 74HC5555 inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2 Features and benefits • Supply voltage range from 2.0 V to 6.
Published: |