74HC240; 74HCT240
Octal buffer/line driver; 3-state; inverting
Rev. 5 — 15 July 2020
Product data sheet
1. General description
The 74HC240; 74HCT240 is an 8-bit inverting buffer/line driver with 3-state outputs. The device
can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE
and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to
assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current
limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
• Wide supply voltage range from 2.0 V to 6.0 V
• CMOS low power dissipation
• High noise immunity
• Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
• Complies with JEDEC standards:
• JESD8C (2.7 V to 3.6 V)
• JESD7A (2.0 V to 6.0 V)
• Input levels:
• For 74HC240: CMOS level
• For 74HCT240: TTL level
• Inverting 3-state outputs
• ESD protection:
• • HBM JESD22-A114F exceeds 2000 V
• MM JESD22-A115-A exceeds 200 V
• Multiple package options
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name
74HC240D
-40 °C to +125 °C SO20
74HCT240D
74HC240DB
-40 °C to +125 °C SSOP20
74HCT240DB
74HC240PW -40 °C to +125 °C TSSOP20
74HCT240PW
74HC240BQ
-40 °C to +125 °C DHVQFN20
74HCT240BQ
Description
plastic small outline package; 20 leads;
body width 7.5 mm
plastic shrink small outline package; 20 leads;
body width 5.3 mm
plastic thin shrink small outline package; 20 leads;
body width 4.4 mm
plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 20 terminals;
body 2.5 × 4.5 × 0.85 mm
Version
SOT163-1
SOT339-1
SOT360-1
SOT764-1