Datasheet4U Logo Datasheet4U.com

74HCT244-Q100 - Octal buffer/line driver

Download the 74HCT244-Q100 datasheet PDF (74HC244-Q100 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for octal buffer/line driver.

Description

The 74HC244-Q100; 74HCT244-Q100 is an 8-bit buffer/line driver with 3-state outputs.

The device can be used as two 4-bit buffers or one 8-bit buffer.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Input levels:.
  • For 74HC244-Q100: CMOS level.
  • For 74HCT244-Q100: TTL level.
  • Octal bus interface.
  • Non-invertin.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC244-Q100-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • 74HCT244 - Octal buffer/line driver (NXP)
  • 74HCT244 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HCT244D - Octal Bus Buffer (Toshiba)
  • 74HCT240 - Octal buffer/line driver (Philips)
  • 74HCT240 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HCT240D - Octal Bus Buffer (Toshiba)
  • 74HCT241 - Octal buffer/line driver (Philips)
  • 74HCT241 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HCT242 - Quad bus transceiver (Philips)
  • 74HCT243 - Quad bus transceiver (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC244-Q100; 74HCT244-Q100 Octal buffer/line driver; 3-state Rev. 4 — 27 July 2021 Product data sheet 1. General description The 74HC244-Q100; 74HCT244-Q100 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |