Datasheet4U Logo Datasheet4U.com

74HCT245-Q100 - Octal bus tranceiver

Download the 74HCT245-Q100 datasheet PDF (74HC245-Q100 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for octal bus tranceiver.

Description

The 74HC245-Q100; 74HCT245-Q100 is an 8-bit transceiver with 3-state outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Complies with JEDEC standard JESD7A.
  • Input levels:.
  • For 74HC245-Q100: CMOS level.
  • For 74HCT245-Q100: TTL level.
  • Octal bidirectional bus interface.
  • Non-inverting 3-state outputs.
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM JESD22-A114F exceeds 2000 V.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC245-Q100-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • 74HCT245-Q100 - Octal bus tranceiver (NXP)
  • 74HCT245 - Octal Bus Transceivers (Texas Instruments)
  • 74HCT245 - Octal bus transceiver (NXP)
  • 74HCT245D - Octal Bus Transceiver (Toshiba)
  • 74HCT240 - Octal buffer/line driver (Philips)
  • 74HCT240 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HCT240D - Octal Bus Buffer (Toshiba)
  • 74HCT241 - Octal buffer/line driver (Philips)
  • 74HCT241 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HCT242 - Quad bus transceiver (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC245-Q100; 74HCT245-Q100 Octal bus transceiver; 3-state Rev. 2 — 14 July 2020 Product data sheet 1. General description The 74HC245-Q100; 74HCT245-Q100 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |