Datasheet4U Logo Datasheet4U.com

74HCT541-Q100 - Octal buffer/line driver

Download the 74HCT541-Q100 datasheet PDF (74HC541-Q100 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for octal buffer/line driver.

Description

The 74HC541-Q100; 74HCT541-Q100 is an octal non-inverting buffer/line driver with 3-state outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Non-Inverting outputs.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Inp.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC541-Q100-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • 74HCT541D - Octal Bus Buffer (Toshiba)
  • 74HCT540 - Octal buffer/line driver (Philips)
  • 74HCT540D - Octal Bus Buffer (Toshiba)
  • 74HCT533 - Octal D-type transparent latch (Philips)
  • 74HCT534 - Octal D-type flip-flop (Philips)
  • 74HCT5555 - Programmable delay timer (Philips)
  • 74HCT563 - Octal D-type transparent latch (Philips)
  • 74HCT564 - Octal D-type flip-flop (Philips)
  • 74HCT573 - Octal D-type transparent latch (NXP)
  • 74HCT574 - Octal D-type flip-flop (NXP)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC541-Q100; 74HCT541-Q100 Octal buffer/line driver; 3-state Rev. 2 — 12 July 2021 Product data sheet 1. General description The 74HC541-Q100; 74HCT541-Q100 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output-enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |