Datasheet4U Logo Datasheet4U.com

74HCT541 - Octal buffer/line driver

Download the 74HCT541 datasheet PDF. This datasheet also covers the 74HC541 variant, as both devices belong to the same octal buffer/line driver family and are provided as variant models within a single manufacturer datasheet.

Description

The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs.

Features

  • Wide supply voltage range from 2.0 to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Non-Inverting outputs.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Input levels:.
  • For 74HC541: CMOS levels.
  • For 74HCT541: TTL levels.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC541-nexperia.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number 74HCT541
Manufacturer Nexperia
File Size 246.85 KB
Description Octal buffer/line driver
Datasheet download datasheet 74HCT541 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HCT541D Octal Bus Buffer Toshiba
74HCT540 Octal buffer/line driver Philips
74HCT540D Octal Bus Buffer Toshiba
74HCT533 Octal D-type transparent latch Philips
74HCT534 Octal D-type flip-flop Philips

Other Datasheets by Nexperia

Part Number Description
74HCT541-Q100 Octal buffer/line driver
74HCT541D Octal buffer/line driver
74HCT540 Octal buffer/line driver
74HCT540-Q100 Octal buffer/line driver
74HCT540D Octal buffer/line driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC541; 74HCT541 Octal buffer/line driver; 3-state Rev. 5 — 12 July 2021 Product data sheet 1. General description The 74HC541; 74HCT541 is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits • Wide supply voltage range from 2.0 to 6.0 V • CMOS low power dissipation • High noise immunity • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B • Non-Inverting outputs • Complies with JEDEC standards: • JESD8C (2.7 V to 3.6 V) • JESD7A (2.0 V to 6.
Published: |