Datasheet4U Logo Datasheet4U.com

74HCT573-Q100 - Octal D-type transparent latch

Download the 74HCT573-Q100 datasheet PDF (74HC573-Q100 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for octal d-type transparent latch.

Description

The 74HC573-Q100; 74HCT573-Q100 is an 8-bit D-type transparent latch with 3-state outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Input levels:.
  • For 74HC573-Q100: CMOS level.
  • For 74HCT573-Q100: TTL level.
  • Inputs and outputs on opposite sides of package allowing easy interface with microprocessors.
  • Useful as input or output port for microprocessors and microcomputers.
  • 3-state non-inverting outputs for bus-oriented applicat.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC573-Q100-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • 74HCT573 - Octal D-type transparent latch (NXP)
  • 74HCT574 - Octal D-type flip-flop (NXP)
  • 74HCT574 - Octal D-Type Flip-Flop (Texas Instruments)
  • 74HCT533 - Octal D-type transparent latch (Philips)
  • 74HCT534 - Octal D-type flip-flop (Philips)
  • 74HCT540 - Octal buffer/line driver (Philips)
  • 74HCT540D - Octal Bus Buffer (Toshiba)
  • 74HCT541D - Octal Bus Buffer (Toshiba)
  • 74HCT5555 - Programmable delay timer (Philips)
  • 74HCT563 - Octal D-type transparent latch (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC573-Q100; 74HCT573-Q100 Octal D-type transparent latch; 3-state Rev. 6 — 10 February 2021 Product data sheet 1. General description The 74HC573-Q100; 74HCT573-Q100 is an 8-bit D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Operation of the OE input does not affect the state of the latches. Inputs include clamp diodes.
Published: |