Datasheet4U Logo Datasheet4U.com

74HCT74-Q100 - Dual D-type flip-flop

Download the 74HCT74-Q100 datasheet PDF (74HC74-Q100 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for dual d-type flip-flop.

Description

The 74HC74-Q100; 74HCT74-Q100 are dual positive edge triggered D-type flip-flop with individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Input levels:.
  • For 74HC74-Q100: CMOS level.
  • For 74HCT74-Q100: TTL level.
  • Symmetrical output impedance.
  • Low power dissipation.
  • High noise immunity.
  • Balanced propagation delays.
  • Specified in compliance with JEDEC standard no. 7A.
  • ESD protection:.
  • MIL-STD-883, m.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC74-Q100-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • 74HCT74 - Dual D-Type Positive-Edge-Triggered Flip-Flips (Texas Instruments)
  • 74HCT74 - Dual D-Type Flip-Flop (STMicroelectronics)
  • 74HCT7403 - 4-Bit x 64-word FIFO register (Philips)
  • 74HCT7403 - 4-bit x 64-word FIFO register (NXP)
  • 74HCT7404 - 5-Bit x 64-word FIFO register (Philips)
  • 74HCT7030 - 9-bit x 64-word FIFO register (Philips)
  • 74HCT7046A - Phase-locked-loop (NXP)
  • 74HCT7046A - Phase-locked-loop (Philips)
  • 74HCT7080 - 16-bit even/odd parity generator/checker (Philips)
  • 74HCT7245 - Octal bus Schmitt-trigger transceiver (Philips)
Other Datasheets by nexperia
  • 74HCT74 - Dual D-type flip-flop
  • 74HCT74D - Dual D-type flip-flop
  • 74HCT7540 - Octal Schmitt trigger buffer/line driver
  • 74HCT7540D - Octal Schmitt trigger buffer/line driver
  • 74HCT7541 - Octal Schmitt trigger buffer/line driver
  • 74HCT7541-Q100 - Octal Schmitt trigger buffer/line driver
  • 74HCT7541D - Octal Schmitt trigger buffer/line driver
  • 74HCT00 - Quad 2-input NAND gate

Full PDF Text Transcription

Click to expand full text
74HC74-Q100; 74HCT74-Q100 Dual D-type flip-flop with set and reset; positive edge-trigger Rev. 4 — 21 April 2020 Product data sheet 1. General description The 74HC74-Q100; 74HCT74-Q100 are dual positive edge triggered D-type flip-flop with individual data (nD), clock (nCP), set (nSD) and reset (nRD) inputs, and complementary nQ and nQ outputs. Data at the nD-input, that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition, will be stored in the flip-flop and appear at the nQ output. The Schmitt-trigger action in the clock input, makes the circuit highly tolerant to slower clock rise and fall times. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Published: |