Datasheet4U Logo Datasheet4U.com

74HCT7541-Q100 - Octal Schmitt trigger buffer/line driver

Download the 74HCT7541-Q100 datasheet PDF (74HC7541-Q100 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for octal schmitt trigger buffer/line driver.

Description

The 74HC7541-Q100; 74HCT7541-Q100 is an 8-bit buffer/line driver with Schmitt-trigger inputs and 3-state outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Unlimited input rise and fall times.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC7541-Q100-nexperia.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number 74HCT7541-Q100
Manufacturer nexperia
File Size 247.34 KB
Description Octal Schmitt trigger buffer/line driver
Datasheet download datasheet 74HCT7541-Q100 Datasheet

📁 Similar Datasheet

  • 74HCT7541 - Octal Schmitt trigger buffer/line driver (Philips)
  • 74HCT7541 - Octal Schmitt trigger buffer/line driver (NXP)
  • 74HCT7540 - Octal Schmitt trigger buffer/line driver (Philips)
  • 74HCT75 - Quad bistable transparent latch (Philips)
  • 74HCT7597 - 8-bit shift register (Philips)
  • 74HCT7030 - 9-bit x 64-word FIFO register (Philips)
  • 74HCT7046A - Phase-locked-loop (NXP)
  • 74HCT7046A - Phase-locked-loop (Philips)
  • 74HCT7080 - 16-bit even/odd parity generator/checker (Philips)
  • 74HCT7245 - Octal bus Schmitt-trigger transceiver (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC7541-Q100; 74HCT7541-Q100 Octal Schmitt trigger buffer/line driver; 3-state Rev. 2 — 3 August 2021 Product data sheet 1. General description The 74HC7541-Q100; 74HCT7541-Q100 is an 8-bit buffer/line driver with Schmitt-trigger inputs and 3-state outputs. The device features two output enables (OE1 and OE2). A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC. Schmitt trigger inputs transform slowly changing input signals into sharply defined jitter-free output signals. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |