Datasheet4U Logo Datasheet4U.com

74LV244-Q100 - Octal buffer/line driver

Description

The 74LV244-Q100 is an 8-bit buffer/line driver with 3-state outputs.

The device can be used as two 4-bit buffers or one 8-bit buffer.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.0 to 5.5 V.
  • CMOS low power dissipation.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Optimized for low voltage.

📥 Download Datasheet

📁 Similar Datasheet

  • 74LV244 - Octal buffer/line driver (NXP)
  • 74LV244A - Octal Buffers/Drivers (Texas Instruments)
  • 74LV244AT - Octal Buffers/Drivers (Texas Instruments)
  • 74LV240 - Octal buffer/line driver (Philips)
  • 74LV241 - Octal buffer/line driver (Philips)
  • 74LV245 - Octal bus transceiver (Philips)
  • 74LV20 - Dual 4-input NAND gate (Philips)
  • 74LV251 - 8-input multiplexer (Philips)
  • 74LV257 - Quad 2-input multiplexer (Philips)
  • 74LV259 - 8-bit addressable latch (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LV244-Q100 Octal buffer/line driver; 3-state Rev. 2 — 24 September 2021 Product data sheet 1. General description The 74LV244-Q100 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |