Datasheet4U Logo Datasheet4U.com

74LV393D - Dual 4-bit binary ripple counter

Download the 74LV393D datasheet PDF (74LV393 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for dual 4-bit binary ripple counter.

Description

The 74LV393 is a dual 4-stage binary ripple counter.

Features

  • Optimized for low voltage.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74LV393-nexperia.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number 74LV393D
Manufacturer nexperia
File Size 230.57 KB
Description Dual 4-bit binary ripple counter
Datasheet download datasheet 74LV393D Datasheet

📁 Similar Datasheet

  • 74LV393 - Dual 4-bit binary ripple counter (Philips)
  • 74LV32 - Quad 2-input OR gate (Philips)
  • 74LV32A - QUADRUPLE 2-INPUT OR GATES (Diodes)
  • 74LV365 - Hex buffer/line driver (Philips)
  • 74LV367 - Hex buffer/line driver (Philips)
  • 74LV368 - Hex buffer/line driver (Philips)
  • 74LV373 - Octal D-type transparent latch (Philips)
  • 74LV373 - OCTAL D-TYPE TRANSPARENT LATCH (System Logic Semiconductor)
  • 74LV374 - Octal D-type flip-flop (Philips)
  • 74LV377 - Octal D-type flip-flop (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LV393 Dual 4-bit binary ripple counter Rev. 6 — 19 March 2021 Product data sheet 1. General description The 74LV393 is a dual 4-stage binary ripple counter. Each counter features a clock input (nCP), an overriding asynchronous master reset input (nMR) and 4 buffered parallel outputs (nQ0 to nQ3). The counter advances on the HIGH-to-LOW transition of nCP. A HIGH on nMR clears the counter stages and forces the outputs LOW, independent of the state of nCP. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess VCC. 2. Features and benefits • Optimized for low voltage applications: 1.0 V to 3.6 V • Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V • Typical VOLP (output ground bounce) 0.8 V at VCC = 3.
Published: |