Datasheet4U Logo Datasheet4U.com

74LVC1G27-Q100 - Single 3-input NOR gate

Description

The 74LVC1G27-Q100 provides one 3-input NOR function.

Inputs can be driven from either 3.3 V or 5 V devices.

This feature allows the use of these devices as translators in mixed 3.3 V and 5 V applications.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.65 V to 5.5 V.
  • High noise immunity.
  • ±24 mA output drive (VCC = 3.0 V).
  • CMOS low power consumption.
  • Latch-up performance exceeds 250 mA.
  • Direct interface with TTL levels.
  • Inputs accept voltages up to 5 V.
  • Complies with JEDEC standard:.

📥 Download Datasheet

📁 Similar Datasheet

  • 74LVC1G00 - SINGLE 2 INPUT POSITIVE NAND GATE (Diodes)
  • 74LVC1G02 - SINGLE 2 INPUT POSITIVE NOR GATE (Diodes)
  • 74LVC1G04 - SINGLE INVERTER (Diodes)
  • 74LVC1G06 - SINGLE INVERTER BUFFER/DRIVER (Diodes)
  • 74LVC1G07 - Buffer (NXP)
  • 74LVC1G07 - SINGLE BUFFER/DRIVER (Diodes)
  • 74LVC1G08 - SINGLE 2 INPUT POSITIVE AND GATE (Diodes)
  • 74LVC1G10 - SINGLE 3 INPUT POSITIVE NAND GATE (Diodes)
  • 74LVC1G11 - Single 3-input AND gate (NXP)
  • 74LVC1G11 - SINGLE 3 INPUT POSITIVE AND GATE (Diodes)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC1G27-Q100 Single 3-input NOR gate Rev. 3 — 4 February 2022 Product data sheet 1. General description The 74LVC1G27-Q100 provides one 3-input NOR function. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V applications. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall time. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |