Datasheet4U Logo Datasheet4U.com

74LVC541A-Q100 - Octal buffer/line driver

Description

The 74LVC541A-Q100 is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs.

The output enable inputs OE1 and OE2 control the 3-state outputs.

This device is fully specified for partial power-down applications using IOFF.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • 5 V tolerant inputs for interfacing with 5 V logic.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.
  • Direct interface with TTL levels.
  • Complies with JEDEC standard:.
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A (2.3 V to 2.7 V).
  • JESD8-C/JESD36 (2.7 V to 3.6.

📥 Download Datasheet

Datasheet preview – 74LVC541A-Q100

Datasheet Details

Part number 74LVC541A-Q100
Manufacturer nexperia
File Size 234.43 KB
Description Octal buffer/line driver
Datasheet download datasheet 74LVC541A-Q100 Datasheet
Additional preview pages of the 74LVC541A-Q100 datasheet.

📁 Similar Datasheet

  • 74LVC541A - Octal buffer/line driver (NXP)
  • 74LVC541A - OCTAL BUFFER/LINE DRIVER (Diodes)
  • 74LVC541A - Low-Voltage CMOS Octal Buffer (ON Semiconductor)
  • 74LVC540A - OCTAL BUFFER/LINE DRIVER (Diodes)
  • 74LVC540A - Low-Voltage CMOS Octal Buffer (ON Semiconductor)
  • 74LVC543 - Octal D-type registered transceiver (Philips)
  • 74LVC543A - Octal D-type registered transceiver (NXP)
  • 74LVC544A - Octal D-type registered transceiver (NXP)
  • 74LVC573A - Octal D-type transparent latch (NXP)
  • 74LVC573A - OCTAL D-TYPE LATCH (STMicroelectronics)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC541A-Q100 Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 3 — 13 March 2020 Product data sheet 1. General description The 74LVC541A-Q100 is an octal non-inverting buffer/line driver with 5 V tolerant inputs and outputs. The output enable inputs OE1 and OE2 control the 3-state outputs. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3 V and 5 V applications.
Published: |