HEF4538B-Q100 Datasheet | Nexperia

description The HEF4538B-Q100 is a dual retriggerable-resettable monostable multivibrator. Each multivibrator has an active LOW trigger/retrigger input (n A), an active HIGH trigger/retrigger input (n B), an overriding active LOW direct reset input (n CD), an output (n Q) and its plement (n Q), and two pins (n REXT/CEXT, and n CEXT, always connected to ground) for connecting the external timing ponents CEXT and REXT. Typical pulse width variation over the specified temperature range is ±0.2 %. The multivibrator may be triggered by either the positive or the negative edges of the input pulse and will produce an accurate output pulse with a pulse width range of 10 μs to infinity. The duration and accuracy of the output pulse are determined by the external timing ponents CEXT and REXT. The output pulse width (t W) is equal to REXT × CEXT. The linear design techniques in LOCMOS (Local Oxide CMOS) guarantee precise control of the output pulse width. A LOW level at n CD terminates the output pulse immediately. The trigger inputs’ Schmitt trigger action makes the circuit highly tolerant of slower rise and fall times. It operates over a remended VDD power supply range of 3 V to 15 V referenced to VSS (usually ground). Unused inputs must be connected to VDD, VSS, or another input. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits - Automotive product qualification in accordance with AEC-Q100 (Grade 1) - Specified from -40 °C to +85 °C and from -40 °C to +125 °C - Tolerant of slow trigger rise and fall times - Fully static operation - 5 V, 10 V, and 15 V parametric ratings - Standardized symmetrical output characteristics - ESD protection: - MIL-STD-883, method 3015 exceeds 2000 V - HBM JESD22-A114F exceeds 2000 V - MM JESD22-A115-A exceeds 200 V (C = 200 p F; R = 0 Ω) - plies with JEDEC standard JESD 13-B 3. Ordering information Table 1. Ordering...