M032BTAG8AN Datasheet | Nuvoton Technology

DESCRIPTION The M031BT/M032BT series microcontroller (MCU) is based on Arm Cortex-M0 core with built-in Bluetooth Low Energy 5.0 (BLE 5.0) with rich peripherals and analog functions for applications that need wireless connectivity with multiple control functions. The M031BT/M032BT series is pliant with the BLE 5.0 standard supporting data rates up to 2 Mbps, offering 2.4 GHz proprietary stacks to achieve more possibility for wireless connectivity and Over-the-Air (OTA) for firmware upgrade. The M031BT/M032BT series solution allows those microcontroller applications to be the Internet of Things (Io T) devices with wireless connectivity. The M031BT/M032BT series runs up to 72 MHz and features 64 Kbytes to 512 Kbytes Flash, 8 Kbytes to 96 Kbytes SRAM, 1.8V ~ 3.6V supply voltages, and supports 5V I/O tolerance within -40°C ~ 85°C operating temperature. The M031BT/M032BT series provides a solution that need the connection with enhanced 2 MSPS fast conversion rate 12-bit ADC, 2 parators and up to 24-ch 144 MHz PWM control. The M031BT/M032BT supports a fast and precise data conversion for the voltage, current, and sensor data, and fast response control to the external device. Additionally, the M031BT/M032BT series also provides plenty of peripherals including a Universal Serial Control Interface (USCI) that can be set as UART/SPI/I2C flexibly, 2 sets of I2C, up to 8 sets of UART, and 1-wire UART interface for data munication between master and slave devices. Moreover, part numbers with the M032BT series are all based on the M031BT series and enhanced with the crystal-less USB 2.0 full-speed device feature for USB related applications. The M031BT series supports small form factor package QFN 48-pin (5 mm x 5 mm) that makes the PCB design to be pact size. The M032BT series offers QFN 68-pin (8 mm x 8 mm) for more functionality I/O control. For the development, Nuvoton provides the Nu Maker evaluation board and Nuvoton Nu-Link debugger. The 3rd Party IDE such as Keil MDK, IAR...