Datasheet4U Logo Datasheet4U.com

QPL9058 Datasheet 0.5ghz - 6.0ghz Ultra Low-noise Lna

Manufacturer: Qorvo

Overview: QPL9058 ® 0.5 – 6.0 GHz Ultra Low-Noise LNA Product Overview The QPL9058 is a high-linearity, ultra-low noise amplifier in a small 2 x 2 mm surface-mount package. At 3.6 GHz, the amplifier typically provides 18 dB gain, +36 dBm OIP3 at a 54 mA bias setting, and 0.6 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2 mm package. The QPL9058 is bias adjustable and requires minimal external components to operate. It also has a power down control capability integrated into the die for TDD applications.

Datasheet Details

Part number QPL9058
Manufacturer Qorvo
File Size 1.22 MB
Description 0.5GHz - 6.0GHz Ultra Low-Noise LNA
Datasheet QPL9058-qorvo.pdf

General Description

2500 pieces on a 7” reel 0.5-6.0 GHz Evaluation Board Data Sheet, Rev.

D, November 18, 2020 | Subject to change without notice 1 of 13 www.qorvo.com QPL9058 ® 0.5 – 6.0 GHz Ultra Low-Noise LNA Absolute Maximum Ratings Parameter Rating Storage Temperature -65 to +150°C Supply Voltage (VDD) +7 V RF Input Power, CW, 50 Ω, T=25°C +27 dBm RF Input Power, LTE 9dB PAR, T=25°C +22 dBm Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device.

Recommended Operating Conditions Parameter Min Typ Max Units Supply Voltage (VDD) +3.15 +5 +5.25 V TCASE −40 Tj for >106 hours MTTF +105 °C +190 °C Electrical specifications are measured at specified test conditions.

Key Features

  • 0.5-6.0 GHz Operational Bandwidth.
  • Low noise figure, 0.6 dB NF @ 3.6 GHz.
  • 36 dBm OIP3.
  • 18 dB small signal gain.
  • Bias adjustable for linearity optimization.
  • Unconditionally stable.
  • Shut-down mode pin with 1.8V logic.
  • Maintains OFF state with high Pin drive.

QPL9058 Distributor