Datasheet Details
| Part number | QPL9547 |
|---|---|
| Manufacturer | Qorvo |
| File Size | 1.04 MB |
| Description | Ultra Low-Noise Amplifier |
| Datasheet | QPL9547-qorvo.pdf |
|
|
Overview: QPL9547 ® 0.1 ~ 6 GHz Ultra Low-Noise Amplifier Product Overview The QPL9547 is a high-linearity, ultra-low noise amplifier in a small 2 x 2 mm surface-mount package. At 1.9 GHz, the amplifier typically provides 19.5 dB gain, +39 dBm OIP3 at a 65 mA bias setting, and 0.3 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 volts. The device is housed in a green/RoHS-compliant industry-standard 2x2 mm package. The QPL9547 is bias adjustable and requires minimal external components to operate. It also has a power down control capability integrated into the die for TDD applications.
| Part number | QPL9547 |
|---|---|
| Manufacturer | Qorvo |
| File Size | 1.04 MB |
| Description | Ultra Low-Noise Amplifier |
| Datasheet | QPL9547-qorvo.pdf |
|
|
|
2500 pieces on a 7” reel 0.6-4.2 GHz Evaluation Board Datasheet, Rev.
D, October 11, 2023 | Subject to change without notice 1 of 11 www.qorvo.com QPL9547 ® 0.1 ~ 6 GHz Ultra Low-Noise Amplifier Absolute Maximum Ratings Parameter Storage Temperature Rating -65 to +150°C Supply Voltage (VDD) 7V RF Input Power, CW, 50Ω, T=25°C 22 dBm Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device.
Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability.
| Part Number | Description |
|---|---|
| QPL9503 | Ultra-Low Noise Flat Gain Amplifier |
| QPL9058 | 0.5GHz - 6.0GHz Ultra Low-Noise LNA |
| QPL9065 | Ultra Low-Noise 2-Stage Bypass LNA |
| QPL9095 | Bypass LNA |
| QPL1811 | CATV Amplifier |
| QPL1815 | CATV Amplifier |
| QPL1816 | 10dB CATV Amplifier |
| QPL1819 | 20dB CATV Amplifier |
| QPL1820 | 22dB CATV Amplifier |
| QPL6202Q | High Gain LNA |