900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






sumzy

KSD301 Datasheet Preview

KSD301 Datasheet

Thermostat

No Preview Available !

KSD301 thermostat / bimetal thermal protector / KSD301
temperature protector
1. KSD301 temperature protector’s Principle and structure 
The main principle of KSD series thermostat is that one function of bimetal discs is snap
action under the change of sensing temperature. The snap action of disc can push the action 
of the contacts through the inside structure, and then caused on of off the circuit finally. The
main characteristic are the fixation of working temperature, the reliable snap action, less
flashover longer working life and less radio interference.
2. KSD301 thermostat’s specification
2.1. Electrical Rating: AC 125V max 15A; AC250V 5A 10A 15A max 16A
2.2. Action Temperature: 0~250 degree
2.3. Recovery and action temperature difference: 10 to 25 degrees,
2.4. Temperature deviation: ±3 / ±5 / ±10 degree.
2.5. Circuit resistance: ≤50mΩ (Initial value)
2.6. Insulation resistance: ≥100mΩ (DC500V Normal State)
2.7. Dielectric Strength: AC50Hz 1500V/min, no breakdown blinding (Normal State)
Life cycle: ≥100000
2.8. Normally closed or open
2.9. Two kinds of mounting bracket: movable or immovable
2.10. Terminal
a. Terminal type: 187series of 4.8*0.5mm and 4.8*0.8mm, 250 series of 6.3*0.8mm
b. Terminal Angle: bending angle: 0~90°C optional
2.11. Two kinds of body: plastic or ceramic.
2.12. Two kinds of temperature sensor face: aluminium cap or copper head.
3. Difference of auto reset type and Manual reset type
3.1. Manual reset type: Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly
and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point cannot reset until reconnecting the circuit by pushing
the reset button. And then the contact points recover, reaching a purpose of connecting or disconnecting the circuit and restarting the circuit by manual reset. (Kindly
reminder: 1.This type of manual reset thermostat can reset when the temperature declines 20 °C after snap action by pressing the reset button. And 4~6 N will be
advisable; please don’t use too much strength. 2. To ensure the normal function, the distance between the reset button and the close cover should not be less than
20.4mm. )
3.2. Manual reset type: Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly
and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point can auto reset and start working.
4. KSD301 bimetal thermostat’s Application
It is used as temperature control for household electric appliances and widely applied in coffee pots, automatic toasters, laminators, electric water pots,steam guns,
steam irons, wind warmers, microwave ovens, water dispensers, etc.
Open temp.
-20°C+-5°C
-15°C+-5°C
-10°C+-5°C
0°C+-5°C-
5°C+-5C
10°C+-5°C
15°C+-5°C
20°C+-5°C
25°C+-5°C
30°C+-5°C
35°C+-5°C
40°C+-5°C
45°C+-5°C
50°C+-5°C
55°C+-5°C
60°C+-5°C
65°C+-5°C
70°C+-5°C
75°C+-5°C
80°C+-5°C
85°C+-5°C
90°C+-5°C
Reset temp.
5°C+-5°C
5°C+-5°C
5°C+-5°C
10°C+-5°C
-5°C+-5°C1
0°C+-5°C
5°C+-5°C
5°C+-5°C
10°C+-5°C
15°C+-5°C
20°C+-5°C
25°C+-5°C
30°C+-5°C
35°C+-5°C
40°C+-5°C
45°C+-5°C
50°C+-5°C
55°C+-5°C
60°C+-5°C
65°C+-5°C
70°C+-5°C
75°C+-5°C
Open temp.
95°C+-5°C
100°C+-5°C
105°C+-5°C
110°C+-5°C
15°C+-5°C
120°C+-5°C
125°C+-5°C
130°C+-5°C
135°C+-5°C
140°C+-5°C
145°C+-5°C
150°C+-5°C
155°C+-5°C
160°C+-5°C
165°C+-5°C
170°C+-5°C
175°C+-5°C
180°C+-5°C
185°C+-5°C
190°C+-5°C
195°C+-5°C
200°C+-5°C
Reset temp.
80°C+-5°C
80°C+-10°C
85°C+-10°C
90°C+-10°C
95°C+-10°C
100°C+-10°C
105°C+-10°C
110°C+-10°C
115°C+-10°C
120°C+-10°C
125°C+-10°C
130°C+-10°C
130°C+-10°C
135°C+-10°C
140°C+-10°C
145°C+-10°C
150°C+-10°C
155°C+-10°C
155°C+-10°C
160°C+-10°C
165°C+-10°C
170°C+-10°C
Open temp.
205°C+-5°C
210°C+-5°C
215°C+-5°C
220°C+-5°C
225°C+-5°C
230°C+-5°C
235°C+-5°C
240°C+-5°C
245°C+-5°C
250°C+-5°C
255°C+-5°C
260°C+-5°C
265°C+-5°C
270°C+-5°C
275°C+-5°C
280°C+-5°C
285°C+-5°C
290°C+-5°C
295°C+-5°C
300°C+-5°C
305°C+-5°C
310°C+-5°C
Reset temp.
175°C+-10°C
180°C+-10°C
185°C+-10°C
190°C+-10°C
195°C+-10°C
200°C+-10°C
205°C+-10°C
210°C+-10°C
215°C+-10°C
220°C+-10°C
225°C+-10°C
230°C+-10°C
235°C+-10°C
240°C+-10°C
245°C+-10°C
250°C+-10°C
255°C+-10°C
260°C+-10°C
265°C+-10°C
270°C+-10°C
275°C+-10°C
280°C+-10°C
Shangchegang Industrial,Hengli Twon, Dongguan City,Guangdong Province, China
COPYRIGHTS©2017 dongguan henghao electric co., ltd ALL RIGHTS RESERVED ICP:16113140


Part Number KSD301
Description Thermostat
Maker sumzy
PDF Download

KSD301 Datasheet PDF





Similar Datasheet

1 KSD301 Curved Pin Big Aluminium Cap
ETC
2 KSD301 Thermostat Device
ETC
3 KSD301 Thermal Fuse
ETC
4 KSD301 Thermostat
Sunshine
5 KSD301 Thermostat
sumzy
6 KSD301A Thermostat
Sunshine
7 KSD301h Thermostats
ETC
8 KSD301v Thermostats
ETC
9 KSD302 KSD302
ETC





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy