S-34TS04A Datasheet - ABLIC

S-34TS04A 2-WIRE SERIAL E2PROM

Select address input Select address input Select address input Ground Serial data I/O Serial clock input Temperature event output Power supply *1. Do not use it in "High-Z". Remark For DFN-8(2030)B package, connect the heatsink of back side to the board, and set electric potential open or VSS..

S-34TS04A www.ablic.com © ABLIC Inc., 2013-2019 2-WIRE SERIAL E2PROM WITH TEMPERATURE SENSOR FOR DIMM SERIAL PRESENCE DETECT Rev.2.0_00_U This IC is a 2-wire serial E2PROM with temperature sensor for DIMM serial presence detect which operates in 2.2 V to 3.6 V voltage ranges. This IC has the capacity of 4 K-bit and the organization of 2 pages × 256-word × 8-bit. Page write and sequential read are available. This IC operates with the I2C-bus at 1.0 MHz maximum. A substantial reduction in curre.

S-34TS04A Features

* Package E2PROM block

* Page write: 16 bytes / page

* Sequential read

* Write protect function during low power supply voltage

* Write protect: Individual software data protection for each of four 128-byte blocks

* Endurance: 106 cycle / word

S-34TS04A-ABLIC.pdf