Datasheet4U Logo Datasheet4U.com

FS6370-01 - EEPROM Programmable 3-PLL Clock Generator

General Description

The FS6370 is a CMOS clock generator IC designed to minimize cost and component count in a variety of electronic systems.

Three EEPROM-programmable phaselocked loops (PLLs) driving four programmable muxes and post dividers provide a high degree of flexibility.

Key Features

  • Just-in-time customization of clock frequencies via internal non-volatile 128-bit serial EEPROM I Cä-bus serial interface Three on-chip PLLs with programmable Reference and Feedback Dividers Four independently programmable muxes and post dividers Programmable power-down of all PLLs and output clock drivers Tristate outputs for board testing One PLL and two mux/post-divider combinations can be modified via SEL_CD input 5V to 3.3V operation Accepts 5MHz to 27MHz crystal resonators ROM-based device.

📥 Download Datasheet

Datasheet Details

Part number FS6370-01
Manufacturer AMI
File Size 1.41 MB
Description EEPROM Programmable 3-PLL Clock Generator
Datasheet download datasheet FS6370-01 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FS6377 Programmable 3-PLL Clock Generator ON Semiconductor
FS6377-01 Programmable 3-PLL Clock Generator ON Semiconductor
FS6377-01g Programmable 3-PLL Clock Generator ON Semiconductor
FS6322-08 THREE PLL CLOCK GENERATOR ETC
FS6330 LAN HUB CLOCK GENERATOR ETC

Other Datasheets by AMI

Part Number Description
FS6011-02 DIGITAL AUDIO/VIDEO CLOCK GENERATOR
FS6050 LOW-SKEW CLOCK FANOUT BUFFER
FS6051 LOW-SKEW CLOCK FANOUT BUFFER
FS6053 LOW-SKEW CLOCK FANOUT BUFFER
FS6054 LOW-SKEW CLOCK FANOUT BUFFER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FS6370-01 EEPROM Programmable 3-PLL Clock Generator IC 1.0 • • • • • • • • • • 2 Features Just-in-time customization of clock frequencies via internal non-volatile 128-bit serial EEPROM I Cä-bus serial interface Three on-chip PLLs with programmable Reference and Feedback Dividers Four independently programmable muxes and post dividers Programmable power-down of all PLLs and output clock drivers Tristate outputs for board testing One PLL and two mux/post-divider combinations can be modified via SEL_CD input 5V to 3.3V operation Accepts 5MHz to 27MHz crystal resonators ROM-based device available for cost reduction migration path – contact your AMI sales representative for more information 2.