AX6906, AX6905 Datasheet - AXElite

AX6906, AX6905, 3-Pin Microprocessor Reset Circuits

AX6905/6 3-Pin Microprocessor Reset Circuits  GENERAL DESCRIPTION The AX6905/6 is used for microprocessor (μP) supervisory circuits to monitor the po

Features

* - Precision Monitoring of +2.5,+3V, +3.3V, and +5V Power-Supply Voltages - Fully Specified Over Temperature
* yÑb€ R ` - Available in Three Output Configurations w - V Output(AX6905) om Push-Pull RESET Low c . ch e Push-Pull RESET High Output(AX6906) t o ofReset Pulse Width g 200ms (Typ. )min

Applications

* since most µP and other circuitry is inoperative with VCC below 1.0V. However, in applications where RESET must be valid down to 0V, adding a pull down resistor to RESET causes any stray leakage currents to flow to ground, holding RESET low. R1’s value is not critical; 100k is large enough not to lo

AX6905-AXElite.pdf