AD7477 Datasheet | Analog Devices

Features Fast throughput rate: 1 MSPS Specified for VDD of 2.35 V to 5.25 V Low power 3.6 m W at 1 MSPS with 3 V supplies 15 m W at 1 MSPS with 5 V supplies Wide input bandwidth 70 d B SNR at 100 k Hz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®-/QSPI™-/MICROWIRE™-/DSP-patible Standby mode: 1 μA maximum 6-lead SOT-23 package APPLICATIONS Battery-powered systems Personal digital assistants Medical instruments Mobile munications Instrumentation and control systems Data acquisition systems High speed modems Optical sensors GENERAL DESCRIPTION The AD7476/AD7477/AD74781 are, respectively, 12-bit, 10-bit, and 8-bit, high speed, low power, successive approximation ADCs. The parts operate from a single 2.35 V to 5.25 V power supply and feature throughput rates up to 1 MSPS. Each part contains a low noise, wide bandwidth track-and-hold amplifier that can handle input frequencies in excess of 6 MHz. The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and the conversion is initiated at this point. There are no pipeline delays associated with these parts. The AD7476/AD7477/AD7478 use advanced design techniques to achieve very low power dissipation at high throughput rates. The reference for the parts is taken internally from VDD. This allows the widest dynamic input range to the ADC. Thus, the analog input range for the parts are 0 V to VDD. The conversion rate is determined by the SCLK. 1 Protected by U.S. Patent No. 6,681,332. Rev. F Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by...