ADM1171 Datasheet - Analog Devices

ADM1171 Hot Swap Controller

The ADM1171 is a hot swap controller that safely enables a printed circuit board to be removed and inserted to a live backplane. This is achieved using an external N-channel power MOSFET with a current control loop that monitors the load current through a sense resistor. An internal charge pump is u.

ADM1171 Features

* Controls supply rails from 2.7 V to 16.5 V Allows protected board removal and insertion to a live backplane External sense resistor provides adjustable analog current limit with circuit breaker Peak fault current limited with fast response Charge pumped gate drive for external N-FET switch Current s

ADM1171_AnalogDevices.pdf