CY7B8392 Datasheet - Cypress

CY7B8392 Low Power Ethernet Coaxial Transceiver

Shield for CD± twisted pair It is possible, through the use of repeaters, to combine several networks together. These networks can be a single Physical layer, i.e., only 10BASE2 or only 10BASE5, or it can by a combination of many different Ethernet physical layers. The WORD PROCESSOR TAPE BACKUP 1.

CY7B8392 Low Power Ethernet Coaxial Transceiver Application This application note describes the differences between the 10BASE5 (Ethernet) and 10BASE2 (Cheapernet) versions of the IEEE 802.3 standard, and provides guidelines for design with the CY7B8392. Data is sent out over the network in packets. An Ethernet packet consists of the preamble, destination address, source address, length field, data, and a Cyclic Redundancy Check (CRC). Each packet can be viewed as a sequence of 8-bit bytes, with.

CY7B8392 Features

* signal is necessary before it can be amplified and sent to the DTE. The CY7B8392 receiver circuitry has

CY7B8392 Datasheet (216.69 KB)