* both I2C and a Serial interfaces. The serial interface is a standard TTL level UART format at 9600 baud,1 start, 2 stop and no parity bits, and may be connected directly to the serial ports on any microcontroller. Up to 16 SRF02's may be connected together on a single bus, either I2C or Serial. New
SRF02
ETC
121.70 KB
Ultrasonic range finder.
SRF02 Ultrasonic range finder
Technical Specification
www.DataSheet4U.com
Overview The SRF02 is a single transducer ultrasonic rangefinder in a smal.
📁 Related Datasheet
SRF005 - ULTRASONIC RANGE SENSOR
(Revolution Education)
SRF005 ULTRASONIC RANGE SENSOR
Specification:
The SRF005 ultrasonic range sensor detects objects in it’s path and can be used to calculate the range .
SRF01 - Ultrasonic range finder
(ETC)
SRF01 Ultrasonic range finder
Technical Documentation
Overview The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB..
SRF02 - Ultrasonic Range Finder Tech
(ETC)
SRF02 Ultra sonic range finder
http://.robotelectronics.co.uk/htm/srf02techI2C.htm
SRF02 Ultr asonic r ange finder
Technical Specification
.
SRF04 - Ultrasonic Rangefinger Schematic
(ETC)
w
w
w
.D
at aS
he
et 4U .c
om
..
.
SRF04 - Ultrasonic Range Finger Application Note
(Parallax)
599 Menlo Drive, Suite 100 Rocklin, California 95765, USA Office: (916) 624-8333 Fax: (916) 624-8003
General: info@parallax. Technical: support@pa.
SRF04 - Ultra Sonic Ranger
(ETC)
SRF04 - Ultra-Sonic Ranger
Technical Specification
This project started after I looked at the Polaroid Ultrasonic Ranging module. It has a number of .
SRF05 - Ultra Sonic Ranger
(ETC)
SRF05 Technical Documentation
Page 1 of 4
SRF05 - Ultra-Sonic Ranger
Technical Specification
..
Introduction The SRF05 is an evolu.
SRF05-HY - Ultra-Sonic Ranger
(ETC)
SRF05-HY - Ultra-Sonic Ranger
Technical Specification
Introduction The SRF05-HY is an evolutionary step from the SRF04-HY, and has been designed to in.
