SMT12F-05W3V3J Datasheet - Emerson

SMT12F-05W3V3J DC-DC / Non-Isolated

1 Trim: A 1% 0.1 W resistor must be directly connected between this pin and pin 8 (GND) to set the output voltage to a lower value than 3.3 V. The temperature stability of the resistor should be 100 ppm/°C or better. The set point range for the 3.3 V model is from 3.3 V to 0.9 V. The resistor requir.

SMT12F-05W3V3J Features

* Designed to meet ultra fast transient requirements up to 300 A/μs step load transients

* 12 A current rating

* Input voltage range: 2.97 Vdc to 5.5 Vdc

* Output voltage range: 0.9 Vdc to 3.3 Vdc

* Extremely low internal power dissipation

* Minimal th

SMT12F-05W3V3J Datasheet (438.57 KB)