Datasheet4U Logo Datasheet4U.com

FAN7527B - Power Factor Correction Controller

Description

The FAN7527B provides simple and high performance active power factor correction.

The FAN7527B is optimized for electronic ballasts and low power and high density power supplies which require minimum board size, reduced external components and low power dissipation.

Features

  • Internal Start-up Timer.
  • Internal R/C Filter Eliminates the Need for an External R/C Filter.
  • Very Precise Adjustable Output Over Voltage Protection.
  • Zero Current Detector.
  • One Quadrant Multiplier.
  • Trimmed 1.5% Internal Band Gap Reference.
  • Under Voltage Lockout with 3V of Hysteresis.
  • Totem Pole Output With High State Clamp.
  • Low Start-up and Operating Current.
  • 8-Pin DIP or 8-Pin SOP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FAN7527B Power Factor Correction Controller ON Semiconductor
FAN7080-GF085 Half Bridge Gate Driver ON Semiconductor
FAN7083-GF085 High Side Gate Driver ON Semiconductor
FAN7085-GF085 High Side Gate Driver ON Semiconductor
FAN7171-F085 High-Side Automotive Gate Driver IC ON Semiconductor

Other Datasheets by Fairchild (onsemi)

Part Number Description
FAN7528 Critical Conduction Mode PFC Controller
FAN7529 Critical Conduction Mode PFC Controller
FAN7530 Critical Conduction Mode PFC Controller
FAN7532 Ballast Control IC
FAN7535 PFC & Ballast Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.fairchildsemi.com FAN7527B Power Factor Correction Controller Features • Internal Start-up Timer • Internal R/C Filter Eliminates the Need for an External R/C Filter • Very Precise Adjustable Output Over Voltage Protection • Zero Current Detector • One Quadrant Multiplier • Trimmed 1.5% Internal Band Gap Reference • Under Voltage Lockout with 3V of Hysteresis • Totem Pole Output With High State Clamp • Low Start-up and Operating Current • 8-Pin DIP or 8-Pin SOP Description The FAN7527B provides simple and high performance active power factor correction. The FAN7527B is optimized for electronic ballasts and low power and high density power supplies which require minimum board size, reduced external components and low power dissipation.
Published: |