Datasheet4U Logo Datasheet4U.com

HA12220F - CD-ROM Drive Head Amplifier

Datasheet Summary

Description

Pin No.

Features

  • Built-in variable resistors (+14 to.
  • 16% 2% steps) for adjusting tracking error EF balance.
  • Built-in variable resistors (.
  • 8 to +8dB 4dB steps) for rough adjusting tracking gain.
  • Built-in variable resistors (.
  • 8 to +8dB 4dB steps) for rough adjusting focus gain.
  • Built-in focus offset insertion circuit (.
  • 0.7 to +0.7V in 0.1V steps).
  • RF amplifier frequency characteristics 30MHz (.
  • 3dB) in case of peaking off.

📥 Download Datasheet

Datasheet preview – HA12220F

Datasheet Details

Part number HA12220F
Manufacturer Hitachi Semiconductor
File Size 143.48 KB
Description CD-ROM Drive Head Amplifier
Datasheet download datasheet HA12220F Datasheet
Additional preview pages of the HA12220F datasheet.

📁 Similar Datasheet

  • HA12226F - Audio Signal Processor (Renesas)
  • HA12227F - Audio Signal Processor (Renesas)
  • HA12237F - Audio Signal Processor for Cassette Deck (Renesas Technology)
  • HA12240FP - Bus Interface Driver/Receiver (ETC)
  • HA12 - 1.0 AMP.HIGH EFFICIENCY RECTIFIERS (Jinan Gude Electronic Device)
  • HA12005 - Low Noise Amplifier (Renesas)
  • HA12006 - Electronic Controller (Renesas)
  • HA1201 - FM IF Amplifier (Hitachi)
  • HA12010 - Fluorescent Tube Driver (Hitachi)
  • HA12016 - FM Stereo Multiplex Decoder (Hitachi)
Other Datasheets by Hitachi Semiconductor

Full PDF Text Transcription

Click to expand full text
HA12220F CD-ROM Drive Head Amplifier IC ADE-207-230 (Z) Target Specification 1st. Edition April 1997 Functions • RF amplifier (Built-in equalizer changing circuit) • Focus error amplifier (fc = 60kHz Typ) • Tracking error amplifier (Built-in cut-off frequency changing circuit fc = 30kHz, 60kHz, 100kHz, 200kHz Typ) • FOK detection circuit (Built-in Vth changing circuit) • Mirror detection circuit • Defect detection circuit • APC amplifier • RFAGC amplifier Features • Built-in variable resistors (+14 to –16% 2% steps) for adjusting tracking error EF balance • Built-in variable resistors (–8 to +8dB 4dB steps) for rough adjusting tracking gain • Built-in variable resistors (–8 to +8dB 4dB steps) for rough adjusting focus gain • Built-in focus offset insertion circuit (–0.7 to +0.7V in 0.
Published: |