Datasheet4U Logo Datasheet4U.com

AT731 - White LED Step-Up Converter

Datasheet Summary

Description

The AT731 is a step-up DC/DC converter specifically designed to drive white LEDs with a constant current.

The device can drive two, three or four LEDs in series from a Li-lon cell.

Features

  • Inherently Matched LED Current High Efficiency: 84% Typical Drives Up to Four LEDs from a 3.2V Supply Drives Up to Eight LEDs from a 5V Supply 36V Rugged Bipolar Switch Fast 1.2MHz Switching Frequency Uses Tiny 1mm Tall Inductors Requires Only 0.22µF Output Capacitor.

📥 Download Datasheet

Datasheet preview – AT731

Datasheet Details

Part number AT731
Manufacturer IAT
File Size 0.98 MB
Description White LED Step-Up Converter
Datasheet download datasheet AT731 Datasheet
Additional preview pages of the AT731 datasheet.

📁 Similar Datasheet

  • AT7316 - 700mA High Voltage Adjustable Current Regulator (Immense Advance Tech)
  • AT7316 - High-voltage power adjustable low dropout linear constant current driver chip (LMC)
  • AT737 - PHASE CONTROL THYRISTOR (Power Semiconductors)
  • AT737LT - PHASE CONTROL THYRISTOR (Power Semiconductors)
  • AT738 - PHASE CONTROL THYRISTOR (Power Semiconductors)
  • AT738LT - PHASE CONTROL THYRISTOR (Power Semiconductors)
  • AT73C201 - POWER SUPPLY AND BATTERY MANAGEMENT IC (ATMEL Corporation)
  • AT73C202 - Power Management (ATMEL Corporation)
  • AT73C203 - Power Management IC for Datacom Platforms (ATMEL Corporation)
  • AT73C204 - Power Management (ATMEL Corporation)
Other Datasheets by IAT
  • AT7373 - 6 Pin Primary-side current control IC
  • AT7383 - 6 Pin Non-isolation Buck current control IC
  • AT7109 - 800mA Synchronous Step-Down Converter
  • AT7170 - 1A 1.5MHz Step-Down Converter
  • AT7174 - High Efficiency PWM Step-Down DC/DC Converter
  • AT7200 - 18V/2A Sync Step-Down Converter
  • AT7240 - 2MHz Synchronous Step-Down Converter
  • AT7241 - 2MHz Synchronous Step-Down Converter

Full PDF Text Transcription

Click to expand full text
AT731 White LED Step-Up Converter FEATURES Inherently Matched LED Current High Efficiency: 84% Typical Drives Up to Four LEDs from a 3.2V Supply Drives Up to Eight LEDs from a 5V Supply 36V Rugged Bipolar Switch Fast 1.2MHz Switching Frequency Uses Tiny 1mm Tall Inductors Requires Only 0.22µF Output Capacitor APPLICATION Cellular Phones PDAs, Handheld Computers Digital Cameras Mp3 Players GPS Receivers Immense Advance Tech. DESCRIPTION The AT731 is a step-up DC/DC converter specifically designed to drive white LEDs with a constant current. The device can drive two, three or four LEDs in series from a Li-lon cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors.
Published: |